Sony DFS-700 - Page 146

Appendixes
A-8 Appendixes
Effect control parameters (continued)
Pattern
No.
Effect type and adjustable parameters
2260
to
2269
Ripple
F1: Amplitude of modulation (Amp = 0 to 100)
F2: Frequency of modulation (Freq = 0 to 100)
F3: Speed of modulation (Speed = –100 to +100) (2260 to 2265 only)
or area of modulation (Area = –100 to +100) (2266, 2267)
F4: Aspect ratio of modulation (Aspect = 0 to 100)
F5: Direction of modulation (Angle = 0 to 99)
F6: Swirl modulation selection (SPMOD = OFF, IN, OUT) (2260 to 2265
only)
F7: Degree of swirl modulation (Spiral = 0 to 100) (2260 to 2265 only)
2270
2271
Burst
F1: Degree of splitting (Freq = 0 to 100)
F2: Rotation around Z axis (Rot = –100 to +100)
F3: Degree of modulation (Spiral = –100 to +100) (2270) or area of
modulation (Area = 0 to 100) (2271)
F4: Form of modulation (FORM = RANDAM/CONST/WAVE1/WAVE2/
LINE1/LINE2/PIXEL1/P1XEL2)
2272 Broken glass
F1: Degree of splitting (Freq = 0 to 100)
F2: Rotation around Z axis (Rot = –100 to +100)
F3: Splitting adjustment (Split = 0 to 100)
2273 Explosion
F1: Stream area (AREA = NARROW/MEDIUM/WIDE/SPWIDE)
F2: Form of modulation (FORM = RANDAM/PIXEL/LINE/WAVE1/
WAVE2/WAVE3/WAVE4/CONST)
F3: Degree of swirl modulation (Spiral = –100 to +100)
F4: Modulation aspect ratio (Aspect = Taller to wider)
F5: Direction of modulation (Angle = 0 to 99)
2274 Ring
F1: Amplitude of modulation (Amp = –100 to +100)
F2: Degree of splitting (Freq = 0 to 100)
F4: Modulation aspect ratio (Aspect = Taller to wider)
F5: Direction of modulation (Angle = 0 to 99)
2275
to
2277
Swirl
F1: Amplitude of modulation (Amp = –100 to +100)
F4: Modulation aspect ratio (Aspect = Taller to wider)
F5: Direction of modulation (Angle = 0 to 99)
2278
2279
Swirl (soft rotation)
F1: Degree of modulation (Soft = 0 to 100)
2280 Amoeba
F2: Fineness of modulation (Freq = 0 to 100)
2283 Meltdown
F1: Form of modulation (FORM = WAVE1/RAND1/WAVE2/RAND2)
F2: Direction of modulation (TRANS = NORM1/NORM2/REV1/REV2)
Effect Control Parameter List
(continued)