Appendixes
A-20 Appendixes
Effect control parameters (continued)
Pattern
No.
Effect type and adjustable parameters
2871 3D object effects
to F1: Mapping mode (MapMod = POINT/FACE1/FACE2)
2876 F2: Size of model (Size = 0 to 100)
F3: Acceleration of fall (Accel = 0 to 100)
F4: Snaking on X-axis (Wave_X = 0 to 100)
F5: Snaking on Y-axis (Wave_Y = 0 to 100)
F6: Amount of auto rotation on X-axis (Spd_X = –100 to +100)
F7: Amount of auto rotation on Y-axis (Spd_Y = –100 to +100)
F8: Amount of auto rotation on Z-axis (Spd_Z = –100 to +100)
F9: Frequency of snaking on X-axis (Freq_X = 0 to 100)
X/Y/Z: Location, enlargement, and reduction of the pattern
Effect Control Parameter List
To Next Page
Loading...
