Connecting to a Windows computer
10
2 Click [Handycam].
3 Click [ImageMixer].
4 Select the language for the installation,
then click [OK].
5 Click [Next].
6 Follow the on-screen instructions.
z Tips
• If you use this software personally, enter
[Personal] etc. for [Company Name].
• Read the [Readme.txt] file (Memo Pad) when it
appears, then click (Close) to close Memo
Pad.
7 Click [Finish].
The installation of ImageMixer is complete.
8 Click [OK], then install WINASPI*
following the on-screen instructions.
* You need this software to copy the pictures
edited on your computer to a CD-R.
9 Click [End].
The installation for WINASPI is complete.
If DirectX 8.0a or a later version is not
installed on your computer
Go on to step 10 to install DirectX 8.0a.
If Windows XP, or DirectX 8.0a or a
later version is installed on your
computer
When [InstallShield Wizard Complete] is
displayed on the screen, click [Finish], then
[OK].
The computer restarts automatically. Then,
remove the CD-ROM. (You can skip the
rest of the procedure.)
10Click [OK] to continue the installation
of DirectX 8.0a.
1 Read [License Agreement], then click
[Yes].
2 Click [Install DirectX] (or [ReInstall]).
To Next Page
Loading...
Need help?
General