Connecting to a Windows computer
Connecting to a Windows computer
9
6 Follow the on-screen instructions.
Read [Note on installing the USB driver],
then click [Next].
The driver installation starts.
For Windows 2000/Windows XP
If a dialog box urging you to check the
digital signature appears, click [Yes] or
[Continue Anyway].
Example: for Windows XP
7 Make sure [Yes, I want to restart my
computer now.] is checked, then click
[Finish].
The computer turns off once, then starts up
again automatically (Restart).
8 Remove the CD-ROM from the disc
drive of your computer.
Step 2: Installing the
image editor software
(ImageMixer Ver.1.5
for Sony)
If you have any questions about
ImageMixer Ver.1.5 for Sony
ImageMixer Ver.1.5 for Sony is a product of
PIXELA Corporation. For details, refer to the
operating instructions on the CD-ROM supplied
with your camcorder.
For Windows 2000/Windows XP
Log on as Administrators.
1 Place the supplied CD-ROM in the
disc drive of your computer.
The application software starts up.
If the screen does not appear
1 Double-click [My Computer].
2 Double-click [ImageMixer] (Disc
drive)*.
* Drive names (such as (E:)) may vary
depending on the computer.
,continued
To Next Page
Loading...
Need help?
General