3
Close
the
paper
tray
cover.
4
Open
the
slide
cover.
5
Insert
the
paper
tray
into
the
printer.
• You can set up to 20 sheets
of
print paper. Riffle
the print paper thoroughly. Insert the print paper
with the protective sheet facing up. Remove the
protective sheet from the tray.
•
If
there
is
no protective sheet, insert the print paper
into the paper tray with its printing surface (the
side with no imprint) facing
up.
• Do not touch the printing surface. Fingerprints or
contamination on the printing surface may result
in
imperfect printing.
• Do not bend the print paper, or cut the print paper
from the perforations before printing.
• To avoid paper jam or malfunctions
of
the printer,
make sure
of
the following before printing:
- Do not write or type on the print paper.
- Do not attach a sticker or stamps on the print
paper.
- When adding print paper to the paper tray, be
sure that the total number
of
print paper sheets
does not exceed 20 sheets.
- Do not insert different types
of
print paper
together into the paper tray.
- Do not print on used print paper. Printing an
image twice on the same paper will not make
the printed image thicker.
- Use the print paper for this printer only.
- Do not use print paper ejected without printing.
Notes on storing the print paper
• To store print paper
in
the tray, remove the paper
tray from the printer and close the slide door
of
the
paper tray.
• Avoid storing the paper with the printed faces
touching each other or in contact with rubber or
plastic products, including vinyl chloride or
plasticizer for an extended period
of
time; color
changes or deterioration
of
the printed image may
occur.
• Avoid placing the print paper
in
a location subject
to high temperatures, high humidity, excessive
dust or direct sunlight.
• When you are going
to
store partially-used print
paper, store it
in
its original bag or a similar
container.
11
GB
I
To Next Page
Loading...
Need help?
General
