To Next PageTo Next PageWhat to do if I cannot insert the print cartridge smoothly into my Sony DPP-FP30?
If you are unable to smoothly insert the print cartridge into your Sony Printer, remove the cartridge and re-insert it. If the ink ribbon is too slack, wind it in the direction of the arrow to remove the slack before re-inserting.
What to do if my Sony DPP-FP30 does not respond to printing orders from my PC?
If your Sony Printer does not respond to a print order from your PC, first check the ERROR indicator. If it's lit or flashing, try these steps: turn the printer off and on, disconnect and reconnect the AC power adapter (waiting 5-10 seconds in between), and restart your computer. Also, ensure that you are not simultaneously connecting a PictBridge-compliant digital camera and the PC to the printer. Remove the cable from the PICTBRIDGE connector when connecting from the PC. If problems persist after these steps, it may be necessary to consult with your Sony dealer or service facilities. You can also try removing and reconnecting the USB cable.
Why won't my Sony Printer feed paper?
If the print paper in your Sony Printer does not feed, there might be several reasons. Ensure that you're using the correct print paper and print cartridge set. Do not exceed the paper limit in the tray and make sure the tray adapter is set according to your paper size. Riffle the print paper thoroughly before loading it, and avoid using bent or folded paper. It is recommended to only use print paper specifically designed for the printer. Also, check for paper jams if the ERROR indicator flashes rapidly; remove the paper tray to inspect and clear any jams.
Why are the printed pictures from my Sony Printer inferior in quality?
To address inferior print quality from your Sony Printer, remember that preview images saved with primary images by a digital camera may have lower print quality. Avoid printing on used paper as it can damage the printer. Ensure you're not touching the shiny printing surface to prevent imperfections from fingerprints. Wipe the plastic part of the print cartridge to remove any dust. Note that AdobeRGB image files not supporting DCF 2.0 will print in vague colors without proper color corrections.
How to fix Sony Printer that cannot be turned on?
If your Sony Printer won't turn on, ensure that the AC power cord is correctly connected to the AC power adapter, and that the adapter is plugged into a working wall outlet. Then, securely insert the adapter plug into the DC IN connector on the printer.
What to do if my Sony DPP-FP30 displays an error with the digital camera?
If your Sony Printer is displaying an error with the digital camera and you cannot print, ensure that the print paper type matches the loaded print cartridge. If they don't match, postpone printing, replace the print cartridges, and then resume printing.
What to do if the print cartridge cannot be removed from my Sony DPP-FP30 Printer?
If you cannot remove the print cartridge from your Sony Printer, keep the paper tray inserted, turn the printer off and then on using the STANDBY button. After the initial motion stops, try removing the cartridge again. If the issue persists, contact Sony service facilities or your Sony dealer.
How to turn off Sony DPP-FP30 when it cannot be turned off normally?
If your Sony Printer won't turn off, keep pressing the STANDBY button for longer than one second until the STANDBY indicator turns red.
Why does my Sony Printer stop printing midway?
If printing stops midway on your Sony Printer, it is likely due to a paper jam. Refer to the section “If paper jams” in your manual to safely remove the jammed paper. If you are unable to remove the jammed paper, contact Sony service facilities for assistance.
Why is my Sony DPP-FP30 Printer stretching the image horizontally when printed?
If your Sony Printer is stretching images horizontally, this may be due to how the image was rotated or processed by your digital camera. This issue is not a printer malfunction but rather a result of the image being rewritten by the camera.
Provides step-by-step instructions for installing the print cartridge correctly.
Guides on how to load print paper into the paper tray for printing.
Explains how to connect and print directly from a PictBridge-compliant digital camera.
Guides on installing system requirements, printer drivers, and PictureGear Studio software.
Solves common problems with turning the printer on/off and digital camera connections.
Addresses issues encountered during PC connectivity, driver installation, and software setup.
Guides on resolving paper jams, feeding errors, and interruptions during printing.
Provides step-by-step instructions for installing the print cartridge correctly.
Guides on how to load print paper into the paper tray for printing.
Explains how to connect and print directly from a PictBridge-compliant digital camera.
Guides on installing system requirements, printer drivers, and PictureGear Studio software.
Solves common problems with turning the printer on/off and digital camera connections.
Addresses issues encountered during PC connectivity, driver installation, and software setup.
Guides on resolving paper jams, feeding errors, and interruptions during printing.
General| Maximum resolution | 300 x 300 DPI |
|---|---|
| Time to first page (color, normal) | 90 s |
| Number of colors | 16.7 M |
| Mac compatibility | No |
| Dimensions (WxDxH) | 175 x 137 x 60.5 mm |
| Printing sizes | 10 x 15 cm |
| Paper tray media types | Photo paper |
| Direct printing | Yes |
| Bundled software | Picture Gear Studio 2.0 |
| Market positioning | Home & office |
Weight and Dimensions| Weight | 950 g |
|---|
