Specifications
• Printer
Printing method
Dye sublimation printing (Yellow/
Magenta/Cyan 3 pass)
Resolution
300 (H) x 300 (V) dpi
Image processing per dot
256 levels processing (8 bits for each
YellowlMagenta/Cyan)
Printing range
I 800 dots x I 200 dots
Printing size
P (4 x 6 inch) size:
101.6 x 152.4 mm (maximum,
borderless)
Printing time (per sheet)
*1*2*3*4.
Memory card/Internal memory .
Approx.
45
sec.
PictBridge*3*5:
Approx. 58 sec.
Via
PC*6:
Approx. 45 sec.
Input/Output connectors
HDMI OUT (output) connector
A-TYPE connector,
I 080i (59.94Hz)/l 080i (50Hz)/576p
(50Hz)/480p (59.94Hz) compatible,
"BRAVIA" Sync compatible
USB (Hi-Speed USB) for PC connection
PictBridge/EXT INTERFACE connector
Slot
"Memory Stick" media insertion slot
SD memory Card/xD-Picture Card
insertion dual-format slot
CompactFlash card insertion slot
82 GB
Compatible image file formats
lPEO: DCF 2.0 compatible, Exif 2.21
compatible,
lFIF*7
TIFF: Exif 2.21 compatible
BMP*8:
1,4,8,
16,24,32
bits Windows
format
Some image file formats are not
compatible.
Maximum number of pixels to be
handled
8 192(H) x 6 144(V) dots
(Excluding "Index Print" and part
of
"CreativePrint")
File system
FATl2/16/32, sector size 2048 bytes or
smaller
Image file name
DCF format, 256 characters 8th or less
hierarchy
Internal memory
Approx. 20 MB
When measuring media capacity, I MB equals 1
million bytes, a portion
of
which is used for data
management.
Maximum number of files to be handled
9 999 files for a memory card/external
device
Ink ribbon/Print Paper
Refer to supplied "About the Print Packs."
LCD screen
LCD panel:
8.8 cm (3.5 type) TFT drive
Total number
of
dots:
230 400 (320 ROB x 240)
Power requirements
DC IN jack,
==
24 V
Power consumption
While printing: 83 W (maximum)
On standby mode: less than IW
Operating temperature
5°C
to
35°C
(41°F
to 95
OF)
To Next Page
Loading...
