Help Guide
Digital Still Camera
DSC-RX0M2
AE lock
When the contrast between the subject and background is high, such as when shooting a backlit subject or a subject
near a window, meter the light at a spot where the subject appears to have the appropriate brightness and lock the
exposure before shooting. To reduce the brightness of the subject, meter the light at a spot brighter than the subject and
lock the exposure of the entire screen. To make the subject brighter, meter the light at a spot darker than the subject and
lock the exposure of the entire screen.
Hint
If you assign [AEL hold] to the
(Enter) button using (Camera Settings2) → [ Custom Key] or [ Custom Key],
you can keep the exposure locked as long as you are holding down the
(Enter) button.
Note
You cannot assign the [AEL hold] function to [Left Button].
4-748-164-11(1) Copyright 2019 Sony Corporation
MENU →
(Camera Settings2) → [ Custom Key] or [ Custom Key], then assign the [AEL toggle]
function to the desired key.
1
Adjust the focus on the spot at which the exposure is adjusted.
2
Press the button to which the [AEL toggle] function is assigned.
The exposure is locked, and
(AE lock) is displayed.
3
Focus on the subject again and shoot an image.
To cancel the exposure lock, press the button to which the [AEL toggle] function is assigned.
4
To Next Page
Loading...
