Sony DSC-RX0M2 - Function Menu Set

Help Guide
Digital Still Camera
DSC-RX0M2
Function Menu Set.
You can assign the functions to be called up when you press the Fn (Function) button.
To change the functions in the function menu (Function Menu Set.)
The following is the procedure for changing [Drive Mode] in the function menu to [Grid Line].
Related Topic
Using the Fn (Function) button
4-748-164-11(1) Copyright 2019 Sony Corporation
MENU →
(Camera Settings2) → [Function Menu Set.] → set a function to the desired location.
1
MENU →
(Camera Settings2) → [Function Menu Set.].1.
Select
(Drive Mode) from among the twelve functions in the function menu using the top/bottom/left/right
buttons, and then press the
(Enter) button.
2.
Press the left/right buttons until [Grid Line] is displayed. Select [Grid Line], and then press the (Enter) button.
(Grid Line) will be displayed in the former location of (Drive Mode) in the function menu.
3.
153