1. MENU → (Setup) → [Pwr Save Start Time] → desired setting.
Menu item details
30 Min/5 Min/2 Min (default setting)/1 Min
Note
The power save function is not activated during playing back slideshow or recording movies, or when
connected to a computer.
[163] How to Use Changing settings Setup menu
PAL/NTSC Selector
Plays back movies recorded with the product on a PAL/NTSC system TV.
1. MENU → (Setup) → [PAL/NTSC Selector] → [Enter]
Note
This function is provided with 1080 50i-compatible devices only. It is not provided with 1080 60i-
compatible devices. The 1080 50i-compatible devices have a “50i” mark on the bottom of the product.
If you insert a memory card that has previously been formatted with the PAL system, a message
telling you that you must re-format the card appears. When you record using the NTSC system, re-
format the memory card or use another memory card.
When the NTSC mode is selected, the “Running on NTSC.” message always appears on the start-up
screen each time you turn the product on.
[164] How to Use Changing settings Setup menu
Demo Mode
The [Demo Mode] function displays the movies recorded on the memory card automatically
(demonstration), when the camera has not been operated for a certain time.
Normally select [Off].
1. MENU → (Setup) → [Demo Mode] → desired setting.
Menu item details
On:
The movie playback demonstration starts automatically if the product is not operated for about one
To Next Page
Loading...
