Depending on the circumstances, you cannot use [Eye AF], such as when [Focus Mode] is set to
[Continuous AF] or [Manual Focus], etc.
[Eye AF] may not function in the following situations:
When the person is wearing sunglasses.
When the front hair covers the person’s eyes.
In low-light or back-lit conditions.
When the eyes are closed.
When the person is in the shade.
When the person is out of focus.
Hint
When the camera focuses on the eyes and [Smile/Face Detect.] is set to [On], a detection frame is
displayed on the face after it is displayed on the eyes. When [Smile/Face Detect.] is set to [Off], a
detection frame is displayed on the eyes for a certain time.
[70] How to Use Using shooting functions Adjusting the exposure
Exposure Comp.
Based on the exposure value set by auto exposure, you can make the entire image brighter or darker if
you adjust [Exposure Comp.] to the plus side or minus side, respectively (exposure compensation).
Normally, exposure is set automatically (auto exposure).
1. / (Exposure Comp.) on the control wheel → press the left/right side of the control wheel or
turn the control wheel, and select the desired exposure range.
You can adjust the exposure in a range of –3.0 EV to +3.0 EV.
Note
You can adjust the exposure in a range of –2.0 EV to +2.0 EV for movies.
If you shoot a subject in extremely bright or dark conditions, or when you use the flash, you may not
be able to get a satisfactory effect.
When you use [Manual Exposure], you can compensate for the exposure only when [ISO] is set to
[ISO AUTO].
[71] How to Use Using shooting functions Adjusting the exposure
Metering Mode
Selects the metering mode that sets which part of the screen to measure for determining the exposure.
1. MENU → (Camera Settings) → [Metering Mode] → desired setting.
To Next Page
Loading...
