Help Guide
Digital Still Camera
DSC-RX10M4
Shooting movies
You can record movies by pressing the MOVIE (Movie) button.
Hint
You can assign the start/stop movie recording function to a preferred key. MENU →
(Camera Settings2) → [Custom
Key(Shoot.)] → set the function to the preferred key.
When you want to specify the area to be focused on, set the area using [Focus Area].
To keep the focus on a face, arrange the composition so that the focusing frame and face detection frame overlap, or set the
[Focus Area] to [Wide].
To adjust the shutter speed and aperture value to the desired settings, set the shooting mode to
(Movie) and select the
desired exposure mode.
The following settings for still image shooting are applied to the movie shooting:
White Balance
Creative Style
Metering Mode
Smile/Face Detect.
D-Range Opt.
You can change the settings for ISO sensitivity, exposure compensation, and focus area while shooting movies.
While shooting movies, the recorded image can be output without the shooting information display by setting [HDMI Info. Display]
to [Off].
Note
The sound of the lens and the product in operation may be recorded during movie recording. The sound of the zoom is
particularly likely to be recorded during movie recording if [Zoom Speed] is set to [Fast] or [Zoom Func. on Ring] is set to [Quick].
You can turn the sound off by selecting MENU →
(Camera Settings2) → [Audio Recording] → [Off].
Press the MOVIE button to start recording.
Since the [MOVIE Button] is set to [Always] in the default setting, movie recording can be started from any
shooting mode.
1
Press the MOVIE button again to stop recording.
2
To Next Page
