Help Guide
Digital Still Camera
DSC-RX10M4
Focus Mode
Selects the focus method to suit the movement of the subject.
Setting details
S (Single-shot AF):
The product locks the focus once focusing is complete. Use this when the subject is motionless.
A(Automatic AF):
[Single-shot AF] and [Continuous AF] are switched according to the movement of the subject. When the shutter button is
pressed halfway down, the product locks the focus when it determines that the subject is motionless, or continues to
focus when the subject is in motion. During continuous shooting, the product automatically shoots with Continuous AF
from the second shot.
C (Continuous AF):
The product continues to focus while the shutter button is pressed and held halfway down. Use this when the subject is
in motion. In [Continuous AF] mode, there is no beep when the camera focuses.
DMF (DMF):
You can make fine adjustments manually after performing auto focusing, letting you focus on a subject more quickly than
when using the manual focus from the beginning. This is convenient in situations such as macro shooting.
MF (Manual Focus):
Adjusts the focus manually. If you cannot focus on the intended subject using auto focus, use manual focus.
Rotate the front lens ring to adjust the focus manually in the direct manual focus mode or manual focus mode.
Focus indicator
(lit):
The subject is in focus and the focus is locked.
(flashing):
The subject is not in focus.
(lit):
The subject is in focus. The focus will be adjusted continuously according to the movements of the subject.
(lit):
Focusing is in progress.
Focus range limiter
When the focus range limiter switch is set to “∞-3m,” the camera focuses on subjects more than 3 m away in telephoto
shooting (shooting with a 35 mm-equivalent focal length of 150 mm or longer). This function allows the camera to focus
Turn the focus mode dial (A) and select the desired mode.
1
To Next Page
