Help Guide
Digital Still Camera
DSC-RX10M4
Protecting images (Protect)
Protects recorded images against accidental erasure. The
mark is displayed on protected images.
Menu item details
Multiple Img.:
Applies or cancels the protection of the selected multiple images.
(1) Select the image to be protected, then press the center of the control wheel. The
mark is displayed in the check
box. To cancel the selection, press the center again to remove the
mark.
(2) To protect other images, repeat step (1).
(3) MENU → [OK].
All in this Folder:
Protects all images in the selected folder.
All with this date:
Protects all images in the selected date range.
Cancel All in this Folder:
Cancels the protection of all images in the selected folder.
Cancel All with this date:
Cancels the protection of all images in the selected date range.
All in Cont. Shoot Grp:
Protects all the images in the selected continuous shooting group.
Cancel All in Cnt Sht Grp:
Cancels the protection of all the images in the selected continuous shooting group.
Hint
If you select a continuous shooting group in [Multiple Img.], all the images in the group will be protected. To select and protect
particular images within the group, execute [Multiple Img.] while displaying the images within the group.
Note
The menu items that can be selected vary according to the [View Mode] setting and the selected content.
4-725-901-11(2) Copyright 2017 Sony Corporation
MENU →
(Playback) → [Protect] → desired setting.
1
To Next Page
Loading...
