Help Guide
Digital Still Camera
DSC-RX10M4
Connecting to a computer
Related Topic
USB Connection
USB LUN Setting
4-725-901-11(2) Copyright 2017 Sony Corporation
Insert a sufficiently charged battery pack into the camera, or connect the camera to a wall outlet (wall
socket) using an AC Adaptor (sold separately).
1
Turn on the camera and the computer.
2
Check that [USB Connection] under
(Setup) is set to [Mass Storage].
3
Connect the camera to the computer using the micro USB cable (supplied) (A).
When you connect the camera to the computer for the first time, the procedure for recognizing the camera may
start automatically on the computer. Wait until the procedure is finished.
If you connect the product to your computer using the micro USB cable when [USB Power Supply] is set to
[On], power is supplied from your computer. (Default setting: [On])
4
To Next Page
