Help Guide
Digital Still Camera
DSC-RX10M4
FINDER/MONITOR
Sets the method for switching the display between Electronic Viewfinder and the screen.
Menu item details
Auto:
When you look into the Electronic Viewfinder, the eye sensor reacts and the display is switched to the Electronic
Viewfinder automatically.
Viewfinder(Manual):
The screen is turned off and the image is displayed only in the Electronic Viewfinder.
Monitor(Manual):
The Electronic Viewfinder is turned off and the image is always displayed on the screen.
Hint
You can assign the [FINDER/MONITOR] function to your preferred key.
MENU →
(Camera Settings2) → [Custom Key(Shoot.)] → set [Finder/Monitor Sel.] to the preferred key.
To turn off automatic switching of the display using the eye sensor, set [FINDER/MONITOR] to [Viewfinder(Manual)] or
[Monitor(Manual)].
Note
When the monitor is pulled out, the eye sensor of the camera will not detect your eye approaching even if [FINDER/MONITOR] is
set to [Auto]. The image will continue to be displayed on the monitor.
Related Topic
Custom Key(Shoot.)/Custom Key(PB)
4-725-901-11(2) Copyright 2017 Sony Corporation
MENU →
(Camera Settings2) → [FINDER/MONITOR] → desired setting.
1
To Next Page
