SceneSelection
For details _ stU) 5 in "R_.ad This First"
For shooting all image appropriately according to the scene condition, a combination of
functions is determined by the camera.
(_/: you call select the desired setting)
ik") V SsL V V Auto
@ Center AF 0.5mt1.0m =_.
3.0mt7.0m
0o
m_ V V V V V V
Toadjusttheexposuremanually
1_) Press • on the control button when the mode dial iN Netto M.
The "Set" indicator at tile lower left of the screen changes to "Return," and the camera enters the manual
exposure setup mode.
@ Adjust the settings using the control button.
_1/_: Aperture (F value)
A/V: Shutter speed
_,1 _ ['G_A FINE 98 ]
" " _ " ' "Return"
/" " " [ Aperture value
Shutter speed
When tile zoonl is set fully to tile W side, you cai1 select an aperture, F2.8 or F5.6.
When tile zoom is set fully to tile T side, you can select an aperture, F5.2 or F10.
You can select a shutter speed from 1/1000 to 30 seconds.
The difference between the settings and proper exposure judged by the camera appears as an EV value
(page 31 ) on the screen. 0EV indicates tile value judged as the most suitable by the camera.
@ Shoot the image.
• To use file Qtdck Review, close-up (Macro), or self-timer function, or to change the flash mode, press •
lo cancel the manual exposure setup mode after step (_). (The "Return" indicator changes lo "See'.)
• The flash is sel to ,_ (Forced flash) or @ (No flash).
27
To Next Page
Loading...
