---'_ Setup2 Fordetai/so, theoperation -_ page45
2
The default settings are marked with _'.
Selects the method used to assign file numbers to images.
Series
Reset
Assigns numbers to files in sequence even if the rccording
folder or the "Memory Stick" is changed. (When the replaced
"Memory Stick" contains a l]le with a number higher than the
last assigned number, a number one higher than the largest
number is assigned.)
Starts from 0001 each time the folder is changed. (When the
recording folder contains a file, a number one higher than the
largest number is assigned.)
Selects the USB mode to be used when connecting the camera to a computer or a PictBridge
compliant priuter usiug the cable for multi-use terminal (DSC-$90/$80/$60) or Cyber-shot
Station (DSC-ST80).
PictBriOoe Connects the camera to a PictBridge compliant printer (page
70).
PTP When [PTP] (Picture Transfer Protocol) is set and the camera
is connected to a computer, the images in the recording folder
selected by the camera arc copied to the computer.
(Compatible with Windows XP and Mac OS X.)
Normal Connects the camera to a computer (page 59).
Sets the video signal output according to connected equipment.
NTSC Sets the video output signal to NTSC mode (e.g., for the
USA, Japan).
PAL Sets the video output signal to PAL mode (e.g., for Europe).
54
To Next Page
Loading...
Need help?
General
