Ush_gthe Setupscree_
UsingSetupitems
You call change the default settings using the Setup screen,
Control button
Mode dial
.....................
/ii!iiii_i
-MENU button
1 Turn on the power.
2 Press MENU to display the menu.
3 Press • on the control button to select
(Setup).
4 Press _IJW41• on the control button to
select the item you want to set.
The frmne or" the selected item turns yellow.
5 Press • to enter the setting.
Setup 2
File Number:
USB Connect:
l_ _video Out: OK
Setup 2
File Number:
USB Connect:
l_ _Video Out:
To turn off the _ (Setup) screen, press MENU.
Tocancelthe_ (Setup)setting
Select [Cancel] if it appears, then press • on the control button, If it does not appear, select
the previous settiug agaiu.
• This setting is maintained even when the power is turned off.
45