Todisconnectthecableformulti-use
terminal/removethe"MemoryStick"/
turnoffthecamera
Drag and drop the drive icon o1"the icon of
the "Memory Stick" to the "Trash" icon,
then remove the cable for the multi-use
terminal, remove the "Memory Stick", or
turn off the camera.
• lfyou are using Mac OS X vl0.0, perfi:>rm the
prncedure above after ynu have turned your
cnmputer nff.
(_) After lhe user information screen appears,
enter the desired name and password.
The installation of the soflwarc starts.
Tostartup"lmagelVlixerVCD2"
Open [hnage Mixer] in [Application], then
double-click [hnageMixer VCD2].
Forinformationontheuseof the
software
Click [?] at the upper-right corner of each
screen to show the on-line help.
Technical support for "lmageMixer
VCD2" is provided by the Pixela User
Support Center. For more
information, refer to the information
included on the CD-ROM
• You can create an image file that is compatible
with the vide() CD creation function. To save the
data in the video CD format on a CD-R, you
need Toast (not supplied) by Roxin.
Toinstall"lmagelVlixerVCD2"
• Shut down all other application sofl',vm'e be[_>re
you install "hnageMixer VCD2."
• The display settings should be 1024 x 768 dots
or higher and 32.000 colors nr higher.
@ Turn on your Macintosh compuler, and
insert the CD-ROM (supplied) into the
CD-ROM drive.
@ Double-click the CD-ROM icon.
@ Copy thc [IMXINST.SIT] file in the
[MAC] l_)lder to the hard disk icon.
(_) Double-click the [IMXINST.SIT] file in
the copy-to folder.
(_) Double-click lhe exlracted [hnageMixer
VCD2 Install] file.
68
To Next Page
Loading...
