The image does not appear on the screen.
• If the cabh: for multi-use termimtl is connected, disconnect it (page 75).
Your camera cannot delete an image.
• Cancel the protection (page 40).
• Set the write-protect switch on the "Memory Stick" to the recording position (page 91).
You
have deleted an image by mistake.
• Once you have deleted an image, you cannot restore it. Wc recommend that you set protection
on an image (page 39), or set the write-protect switch on the "Memory Stick" to the LOCK
position (page 91) to prevent accidental erasure.
The resizing function does not work.
• Youcannot rcsize too'des and Multi Burst images.
You cannot display a DPOF (Print order) mark.
• Youcannot display DPOF (Print order) marks on mm,ies.
You cannot cut a movie.
• The movie is not long enough to cut (shorter than about two seconds).
• Cancel the protection (page 40).
• Still images cannot be cut.
You do not know if the OS of your computer is compatible with the camera.
• Check "Recommended computer enviromnent" (page 57) for Windov_s, and "Recommended
environment" (page 67) for Macintosh.
You cannot install the USB driver.
• In Windov_s 2000, log on as Administrator (authorized Administrators) (page 58).
Your computer does not recognize your camera.
• Turn on the camera (--4 _tel) 2 in "Read This Fi/:st").
• When the battery level is low, install the charged batteries, replace the batteries with new ones
(-_ s:(,!: 1 in "Read This Finer"), or use the AC Adaptor (not supplied) (page 15).
• Use the cable lbr multi-use terminal (DSC-$901S801S60) or Cyber-shot Station (DSC-ST80)
(page 59).
82
To Next Page
Loading...
