Sony EV-C500E - Page 28

28
Editing
Connecting Video Equipment with the
CONTROL S Connector
When using the Control S cable
The synchronized editing using the CONTROL S connector is the same as the
synchronized editing using the LANC connector. This enables you to pause both
VCRs and release pause mode of both VCRs.
You can only perform synchronized editing using the CONTROL S IN connector when
the other VCR has the CONTROL S OUT connector.
if the other video equipment has the synchronized function, use the SYNCHRO EDIT
button
on
the
other
equipment.
,
Set the command'mode of this VCR and the other video equipment to thy same
position.