Sony FCB-EV7520A - Update Procedure

Basic Functions
FCB-EV7520A(GB) D-023-100-11(1)
21
Update Procedure
Enter Maintenance Mode
HOST FCB
CAM_Power off
8x 01 04 00 03 FF
ACK, COMP
8x 01 04 00 0C FF
ACK, COMP
8x 01 04 00 0D FF
ACK, COMP
8x 01 04 00 13 FF
ACK, COMP
8x 01 04 00 04 FF
ACK, COMP
8x 01 04 00 20 FF
ACK, COMP
Enter
Standby
Mode
Enter
Maintenance
Mode
* Do not turn OFF the power while updating because
there is a possibility that the camera will break.
REBOOT AUTOMATICALLY
Maintenance Mode
Sending firmware
Sending Firmware Binary
with X modem protocol
Firmware Update
Ready Message
HOST FCB
CODE NAME+
VERSION + CR
“ready” + CR
“reprogram ( )” + CR
“receive”+ CR
‘reboot’+ CR
* Writing in FlashROM
* Do not turn OFF the power while updating because
there is a possibility that the camera will break.