Sony FCB-EV7520A - Specifications; Imager and Lens Specifications; Exposure and Shutter Specifications

Specifications
FCB-EV7520A(GB) D-023-100-11(1)
56
Specifications
Imager 1/2.8 Type “Exmor R” CMOS Sensor
Picture elements 2130K pixels
Lens 30× Zoom
(Typical value) f= 4.3 mm (WIDE) to 129 mm
(TELE), F1.6 to F4.7
Zoom movement speed
Optical WIDE – Optical TELE
5.0 sec (Focus Tracking On)
2.5 sec (Focus Tracking Off)
Optical WIDE – Digital TELE
(Digital 12×)
7.0 sec (29.97p/59.94p mode)
7.4 sec (25p/50p mode)
Digital WIDE – Digital TELE
(Digital 12×)
2.1 sec (29.97p/59.94p mode)
2.5 sec (25p/50p mode)
Focus Movement time
∞ to Near 1.1 sec
Digital Zoom 12× (360× with optical zoom)
Angle of view (H) Approx. 63.7 degrees (Wide end),
approx. 2.3 degrees (Tele end)
Min. working distance
10 mm (Wide end), 1200 mm
(Tele end)
Sync system Internal
Min. illumination In the case of ICR-Off
(Typical value) 0.01 lx (1/30 sec, 50%,
High Sensitivity mode On)
0.1 lx (1/30 sec, 50%, High
Sensitivity mode Off)
0.0013 lx (1/4 sec, 1/3 sec, 50%,
High Sensitivity mode On)
0.013 lx (1/4 sec, 1/3 sec, 50%,
High Sensitivity mode Off)
In the case of ICR-On
0.0015 lx (1/30 sec, 50%, High
Sensitivity mode On)
0.006 lx (1/30 sec, 50%, High
Sensitivity mode Off)
0.0008 lx (1/4 sec, 1/3 sec, 30%,
High Sensitivity mode On)
Recommended illumination
100 lx to 100,000 lx
Back light compensation
On/Off
Electronic shutter speed
1/1 sec to 1/10000 sec (22 steps)
White Balance Auto, ATW, Indoor, Outdoor, One
Push WB, Manual WB, Outdoor
Auto, Sodium Vapor Lamp (Fix/
Auto/Outdoor Auto)
Gain Auto/Manual
(0 to 50.0 dB (0 to 28 step))
Max. Gain Limit
(10.7 to 50.0 dB (6 to 28 step))
Wide Dynamic Range Mode
On/Off
Noise Reduction
On/Off (level 5 to 1 / Off, 6 steps)
Defog mode On/Off
Aperture control 16 steps
Preset 16-POSITIONS
Camera control VISCA protocol (CMOS 5V)
9.6 kbps, 19.2 kbps, 38.4 kbps,
115.2 kbps, Stop bit, 1 bit
Video Output HD: Digital (LVDS)
Storage temperature/Humidity
–20 °C to +60 °C (–4 °F to +140 °F)/
20% to 95%
Absolute humidity: 36 g/m
3
Operating temperature/Humidity
–5 °C to +60 °C (23 °F to +140 °F)/
20% to 80%
Absolute humidity: 36 g/m
3
Power requirements
6 V to 12 V DC
Power consumption
3.2 W
(during motor operation: 4.0 W)
Mass Approx. 250 g (8.8 oz.)
Dimensions 50 × 60 × 89.7 mm
(2 × 2
3
/8 × 3
5
/8 in.) (w/h/d)