EasyManua.ls Logo

Sony FST-GTK11iP - Page 60

Sony FST-GTK11iP
86 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FST-GTK11iP/GTK33iP/RDH-GTK11iP/GTK33iP
60
MAIN BOARD IC306 BU94604BKV-E2 (AUDIO DECODER)
Pin No. Pin Name I/O Description
1 RESETX I Reset signal input from the system controller
2 SEL_SLAVE I Mode setting terminal “H”: stand alone, “L”: slave Fixed at “L” in this unit
3 SEL_MP3 I
Mode setting terminal “H”: play MP3 only, “L”: play MP1, MP2 and MP3
Fixed at “L” in this unit
4 SEL_DOUT I
Mode setting terminal “H”: analog D/A converter output, “L”: digital output
Fixed at “L” in this unit
5 SEL_VOL I
Mode setting terminal “H”: volume control valid, “L”: volume control invalid
Fixed at “L” in this unit
6 SEL_APLAY I Mode setting terminal “H”: auto play off, “L”: auto play Fixed at “H” in this unit
7 SEL_UTPKT I
Mode setting terminal “H”: normal operation, “L”: USB test packet output
Fixed at “H” in this unit
8 IRPTO O Interrupt request signal output to the system controller
9 TEST2 I Terminal for test
10 MCHNG O Music change signal output to the system controller
11 BUSY O Busy signal output to the system controller
12 IIC SCL I Serial data transfer clock signal input from the system controller
13 IIC SDA I/O Two-way data bus with the system controller
14, 15 A0, A1 - Not used
16 SEL-SMAN I Mode setting terminal “H”: mode2, “L”: mode3 Fixed at “H” in this unit
17 TEST3 I Terminal for test
18 DVDDIO - Power supply terminal (+3.3V)
19 SD_CON - Not used
20 SD_DO - Not used
21 SD_CLK - Not used
22 SD_DI - Not used
23 SD_CS - Not used
24 DVSS - Ground terminal
25, 26 TEST4, TEST5 I Terminal for test
27 DVDD_M2 - Connect to pin 57
28 to 31
TEST6 to TEST8,
ATEST1
I Terminal for test
32 AVDDC - Power supply terminal (+3.3V)
33 USB_DM I Audio data (negative) input terminal
34 USB_DP I Audio data (positive) input terminal
35 AVSSC - Ground terminal
36 REXTI - Not used
37 VOREFI - Not used
38 VDD_PLL - Power supply terminal (+3.3V)
39 TEST_PLL I Terminal for test
40 XIN_PLL I System clock input terminal (16.9344 MHz)
41 XOUT_PLL O System clock output terminal (16.9344 MHz)
42 VSS_PLL - Ground terminal
43 DAVSS - Ground terminal
44 RDACO - Not used
45 VCDACO - Not used
46 LDACO - Not used
47 DAVDD - Power supply terminal (+3.3V)
48 AMUTE - Not used
49 to 52 TEST9 to TEST12 I Terminal for test
53 IIS LRCK O L/R sampling clock signal output to the DSP
54 IIS BCK O Bit clock signal output to the DSP
55 IIS DATA O Audio data output to the DSP
56 TEST13 I Terminal for test
57 DVDD_M1 - Connect to pin 27
58 to 61 TEST14 to TEST17 I Terminal for test
62 DVSS - Ground terminal
63 TMODE - Not used
64 DVDDIO - Power supply terminal (+3.3V)

Table of Contents

Related product manuals