Sony HCD-VX55 - Instruction Manual

6
This section is extracted from
instruction manual.
1 Press CLOCK/TIMER SET.
The hour indication flashes.
2 Press . or > repeatedly to set
the hour.
Step 2: Setting the
time
You must set the time before using the timer
functions.
NX
x
xMm>.
Y
O
v
V
bB
X
1
3,5
2,4
3 Press ENTER.
The minute indication flashes.
4
Press . or > repeatedly to set
the minute.
5 Press ENTER.
The clock starts working.
Tip
If youÕve made a mistake, start over from step 1.
To change the time
The previous explanation shows you how to set the
time while the power is off. To change the time
while the power is on, do the following:
1 Press CLOCK/TIMER SET.
2 Press . or > repeatedly to select
SET CLOCK.
3 Press ENTER.
4 Perform steps 2 through 5 above.
Note
The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.