44
Menu List
<‘ ! ’IND>
02 (U05)
ND ON, OFF [IND]: Sets whether to be included in the status
indications on the viewfinder screen (see page
31).
[NORMAL]: Specifies the conditions under which
the ‘!’ indication is not to be displayed even if
[IND] is ON. (By specifying the standard or
normal conditions here, non-standard or
abnormal conditions can be found with the ‘!’
indication on the viewfinder screen.)
e.g.: With the default setting of ND, the ‘!’ indication
is displayed when an ND filter other than 1 is
selected.
--- : When a CCU is connected (cannot be changed)
Note
CC is available for HDC2500/2550 only.
1
, 2, 3, 4, 5 (combination allowed)
CC ON
, OFF
A, B
, C, D, E (combination
allowed)
WHITE ON
, OFF, ---
P, A
, B (combination allowed)
5600K ON
, OFF, ---
ON, OFF
GAIN ON, OFF, ---
L
, M, H (combination allowed)
SHUTTER ON
, OFF, ---
ON, OFF
FAN ON, OFF
AUTO1
, AUTO2, MIN, MAX
EXT ON
, OFF
FORMAT ON
, OFF
HDC2500: 1080-59.94i
, 1080-
29.97PsF, 1080-50i, 1080-
25PsF, 1080-24PsF, 1080-
23.98PsF, 1080-59.94P, 1080-
50P, 720-59.94P, 720-50P,
1080-59.94i (2×), 1080-50i (2×),
720-59.94P (2×), 720-50P (2×)
HDC2400/2550: 1080-59.94i
, 720-
59.94P, 1080-50i, 720-50P
Y TALLY ON
, OFF
<VF MARKER>
03 (U06)
MARKER ON
, OFF Sets MARKER to ON/OFF.
WHITE
, BLACK, DOT
LEVEL 0 to 100, 70
CENTER ON, OFF
1, 2, 3, 4 1: Entire cross
2: Entire cross with a hole
3: Center
4: Center with a hole
SAFETY ZONE ON, OFF
80.0, 90.0, 92.5, 95.0%
EFFECT ON, OFF
, (FOCUS) (FOCUS): Displayed when INDICATOR of <FOCUS
ASSIST> is ON.
ASPECT ON, OFF
16:9, 15:9, 14:9, 13:9, 4:3, (4.3) (4.3): If VF SCAN is set to 4:3 when HDLA is
attached (cannot be changed)
MASK ON, OFF
, (ON) (ON): If VF SCAN is set to 4:3 when HDLA is
attached (cannot be changed)
0 to 15, 12
Sets the level to darken outside the aspect area.
SAFETY ON, OFF
, (AREA) For the safety marker in Aspect mode.
(AREA): Displayed when AREA MARKER of
<FOCUS ASSIST> is ON.
80.0, 90.0
, 92.5, 95.0%
OPERATION
Page title
PageNo.
Item Settings Description
To Next Page
Loading...
