Sony HDC2400 - FILE Menu

57
Menu List
FILE Menu
Five types of files can be used for easy adjustments of the
camera; Operator, Reference, Scene, OHB, and Lens.
You can store the items set with the OPERATION menu and
customized USER menu in the Operator file.
For the specific items included in these files, refer to the
Maintenance Manual.
<OTHERS>
M16
FAN MODE OFF, AUTO1, AUTO2 , MIN, MAX AUTO1: Normal rotation
AUTO2: Slow rotation
CAM BARS ON, OFF
WHITE SETUP MODE AWB, A.LVL
FILTER WHT MEM ON, OFF Sets the function to use independent white memory
at each CC filter position to ON/OFF. (HDC2500)
<OPTION KEY>
M17
READ (USBtCAM) Execute via ENTER. Reads the install key from a USB drive.
INSTALLED OPTION Displayed only when an option has been installed.
MAINTENANCE
Page title
PageNo.
Item Settings Description
FILE
Page title
PageNo.
Item Settings Description
<OPERATOR FILE>
F01
READ (USB→CAM) Execute via ENTER. Reads the operator file from a USB drive.
WRITE (CAM→USB) Execute via ENTER. Writes the current settings of the operator file items
to a USB drive.
PRESET Execute via ENTER. Sets the operator file items to the preset values in
internal memory.
STORE PRESET FILE Execute via ENTER. Stores the current settings of the operator file items
in the operator file in internal memory.
FILE ID Max.16 characters Enters a comment for the operator file to be written
to a USB drive.
See “To specify a character string” on page 34.
CAM CODE Camera code Display only
DATE Date Display only
<SCENE FILE>
F02
1 Stores and reads scene files (paint data):
When storing a file in camera memory, specify the
number before executing STORE.
When reading, only specify the number.
2
3
4
5
STORE Execute via ENTER.
STANDARD Execute via ENTER. Reads the standard paint data.
READ (USB→CAM) Execute via ENTER. Loads five scene files from a USB drive to internal
memory.
WRITE (CAM→USB) Execute via ENTER. Writes five scene files in the camera’s memory to a
USB drive.
FILE ID Max.16 characters Enters a comment for the scene files to be written to
a USB drive.
See “To specify a character string” on page 34.
CAM CODE Camera code Display only
DATE Date Display only