Sony HT-DDW890 - Specifications

78
GB
Specifications
Amplifier section
Power Output
1)
Models of area code CEL, CEK
Stereo mode (6 ohms, 1 kHz, THD 1%)
90 W + 90 W
Surround mode
2)
(reference) (6 ohms, 1 kHz,
THD 10%)
RMS output
FRONT:135 W
per channel
CENTER:135 W
SURROUND:135 W
per channel
SURROUND BACK:
135 W
1)
Measured under the following conditions:
2)
Reference power output for front, center, surround
and surround back speakers. Depending on the
sound field settings and the source, there may be
no sound output.
Inputs (Analog)
Inputs (Digital)
Outputs (Analog)
Reproduction frequency range:
28 – 20,000 Hz
Tone
FM tuner section
Tuning range 87.5 - 108.0 MHz
Antenna FM wire antenna
Antenna terminals 75 ohms, unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
Models of area code CEL, CEK
With 9-kHz tuning scale:
531 – 1,602 kHz
Antenna Loop antenna
Intermediate frequency
450 kHz
Video section
Inputs/Outputs
Video: 1 Vp-p, 75 ohms
COMPONENT VIDEO:
Y: 1 Vp-p, 75 ohms
P
B/CB: 0.7 Vp-p, 75 ohms
P
R/CR: 0.7 Vp-p, 75 ohms
80 MHz HD Pass Through
General
Power requirements
Power output (DIGITAL MEDIA PORT)
DC OUT: 5V, 700 mA
Power consumption
Power consumption (during standby mode)
0.3 W
Area code Power requirements
CEL, CEK 230 V AC, 50 Hz
SA-CD/CD/CD-R,
TV, SAT, DVD,
VIDEO 1, 3
Sensitivity: 800 mV
Impedance: 50 kohms
DVD (Coaxial) Sensitivity: –
Impedance: 75 ohms
SAT, VIDEO 2/BD
(Optical)
Sensitivity: –
Impedance: –
SA-CD/CD/CD-R
(OUT),
VIDEO 1 (AUDIO
OUT)
Voltage: 800 mV
Impedance: 10 kohms
SUB WOOFER Voltage: 2 V
Impedance: 1 kohm
Gain levels ±6 dB, 1 dB step
Area code Power requirements
CEL, CEK 230 V AC, 50/60 Hz
Area code Power consumption
CEL, CEK 200 W