Sony HT-RT5 - Network Functions; Connecting to a Wired Network

15
GB
Network Functions
Connecting to a Wired
Network
The following illustration is an example
configuration of the network.
We recommend a wired connection for
stable network functioning.
• We recommend that you use a shielded
straight interface cable (LAN cable).
You can set up a wired network
connection by the following procedure.
1 Press HOME.
The home menu appears on the TV
screen.
2 Select [Setup] - [Network
Settings] from the home menu.
3 Select [Internet Settings].
4 Select [Wired Setup].
The screen for selecting the IP
address acquisition method appears
on the TV screen.
5 Select [Auto].
The system starts connecting to the
network.
The confirmation screen appears.
6 Press / to browse information,
and then press .
7 Select [Save & Connect].
The system starts connecting to the
network. For details, refer to the
messages that appear on the TV
screen.
If using a fixed IP address
Select [Custom] in step 5 and follow the
on-screen instructions.
• See [Network Connection Status] when
checking the network connection status
(page 29).
Network Functions
Connecting the System to the
Network Using a LAN Cable
Tip
Modem
Internet
LAN cable
(not
supplied)
LAN cable
(not
supplied)
Server
Router
Setting up a Wired Network
Connection
Tip