• BEHD/HI
Select if the location
of
your surround
speakers corresponds to sections
4)
and
G).
• BEHDILO
Select if the location
of
your surround
speakers corresponds to sections
4)
and
e.
• SIDE/HI
Select
if
the location
of
your surround
speakers corresponds to sections
0 and
G)
.
• SIDEILO
Select
if
the location
of
your surround
speakers corresponds to sections
0 and
e.
Tip
Surround speaker position is designed specifically
for implementation
of
the
CINEMA
STUDIO EX
modes. For other sound fields, speaker position is
not so critical.
Those sound fields were designed under the premise
that the surround speakers would be located behind
the listening position, but presentation remains
fairly consistent even with the surround speakers
positioned at a rather wide angle. However, if the
speakers are pointing toward the listener from the
immediate left and right
of
the listening position, the
surround effects become unclear unless set to
"SIDEILO" or "SIDE/HI".
Nevertheless, each listening environment has many
variables, such
as
wall reflections, and you may
obtain better results using "BEHD/HI"
if
your
speakers are located high above the listening
position, even
if
they are located to the immediate
left and right.
Therefore, although it may result in a setting
contrary to the above explanation, we recommend
that you playback multi channel surround encoded
software and select the setting that provides a good
sense
of
spaciousness and that best succeeds in
forming a cohesive space between the surround
sound from the surround speakers and the sound
of
the front speakers.
If
you are not sure which sounds
best, select "BEHDILO" or "BEHD/HI" and then
use the speaker distance parameter and speaker level
adjustments to obtain proper balance.
• SW DIS1. (Subwoofer distance)
Lets you set the distance from your listening
position to the subwoofer.
.100.
120·
..
~
.
Tip
If
you set
"CAL
LOAD"
in
A.
CAL menu to
"LOAD YES", you can adjust the speakers distance
in
0.0I meter
(l
inch) increment.
• SUR POS. (Surround speaker
position)
Lets you specify the location
of
your surround
speakers for proper implementation
of
the
surround effects
in
the CINEMA STUDIO EX
modes (page 47).
• DIMMER (Brightness of the
display)
Lets you adjust the brightness in 3 steps.
44
GB
To Next Page
Loading...
