Sony HT-SS2300 - Specifications

Specifications
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
(Models of area code
U, UC only)
With 3 ohm loads, both channels driven, from
170 -
20,000 Hz; rated 84 watts per channel
minimum RMS power, with no more than 1%
total harmonic distortion from 250 milliwatts
to rated
ou tput.
Models of area code TH
Power Output
I)
Stereo mode (rated) 90 W + 90 W
(3 ohms at 1kHz,
THO 1%)
Surround mode (reference)
RMS Output
(3 ohms at 1 kHz, THO
10%)
FRONT
2
):
125 W/ch
CENTER
2
): 125 W
SUR
2
):
125 W/ch
(1.5 ohms at 80 Hz, THO
10%)
SUBWOOFER
2
):
210 W
))Measured under
the following conditions:
2)Reference power output for front, center, surround
speakers and subwoofer. Depending
on the sound
field settings and the source, there
may be no
sound output.
Inputs
Analog Sensitivity: 1 V
150 kohms
Oigita1 (Coaxial) Impedance:
75 ohms
Tone
Gain levels ± 10 dB, 0.5 dB step
Reproduction frequency range:
28 - 20,000 Hz
»
c.
c.
::;
O·
~
!!.
-
230 V AC, 50 Hz
120 V AC, 60 Hz
Power requirements
220 V AC, 50 Hz
110 V AC, 60 Hz
240 V AC, 50 Hz
Area code
U, UC,CA
AU
CEL, CEK
TH
TW
Amplifier section
Models of area code U, UC, CA
Power Output
I)
Stereo mode (rated) 84 W + 84 W
(3 ohms at 170-
20,000 Hz, THO 1 %)
Surround mode (reference)
RMS Output
(3 ohms at 1 kHz,
THO 10%)
FRONT
2
): 143 W/ch
CENTER
2): 143 W
SUR
2): 143 WIch
(1.5 ohms at 80 Hz,
THO 10%)
SUBWOOFER
2
):
285 W
Models
of area code CEL, CEK, AU, TW
Power Output
I)
Stereo mode (rated) 108 W + 108 W
(3 ohms at 1 kHz,
THO 1%)
Surround mode (reference)
RMS Output
(3 ohms at I kHz,
THO 10%)
FRONT
2
): 143 W/ch
CENTER
2
): 143 W
SUR
2
): 143 W/ch
(1.5 ohms at 80 Hz,
THO 10%)
SUBWOOFER
2
): 285 W
conffnued-----------
71
G8