4:
Connecting
the
antennas
5:
Preparing
the
receiver
and
the
remote
Connect the supplied AM loop antenna and
FM wire antenna.
Before connecting the antennas,
be
sure to
disconnect the AC power cord (mains lead).
FM wire antenna (supplied)
Connect the AC power cord (mains lead)
to
a
wall outlet.
AC
power cord (mains lead)
-..:::::::====
.....
To
the wall outlet
*The shape
of
the connector varies depending on
the area code
of
this receiver.
Notes
• To prevent noise pickup, keep the AM loop
antenna away from the receiver and other
components.
• Be sure to fully extend the FM wire antenna.
• After connecting the FM wire antenna, keep it as
horizontal as possible.
24
GB
To Next Page
