48
Recording Preparation
Chapter 4 Recording and Playback
Test Recording
Confirm whether images record properly.
When you perform a test recording, images record for five
seconds and then play back automatically.
1
In the [Recording Preparation] screen, use the V, v, B,
and
b buttons to select [Test Record], and press the
ENTER button.
The following message appears.
2
Use the B and b buttons to select [Yes], and press the
ENTER button.
Recording starts, and the following screen appears
while test recording is in progress.
After images are recorded for five seconds, playback
starts automatically.
When the test recording is finished, the [Recording
Preparation] screen appears again.
3
Use the V, v, B, and b buttons to select [Done], and
press the ENTER button.
The [MENU] screen appears again.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
