83
Additional Information
LCD screen
Image: 6.7 cm (2.7 type, aspect ratio 16:9)
Total dot number: 211 200 (960 × 220)
General
Power requirements: DC 6.8 V/7.2 V (battery
pack)
DC 8.4 V (AC Adaptor)
Average power consumption: During camera
recording using the LCD with normal
brightness:
HD: 4.0 W
SD: 3.2 W
Operating temperature: 0 °C to 40 °C (32 °F to
104 °F)
Storage temperature: -20 °C to + 60 °C (-4 °F to
+ 140 °F)
Dimensions (approx.): Main body:
81 × 107 × 42 mm
(3 1/4 × 4 1/4 × 1 11/16 in.) (w/h/d) including
the projecting parts, excluding the cable bush
81 × 122 × 47 mm
(3 1/4 × 4 7/8 × 1 7/8 in.) (w/h/d) including
the projecting parts, excluding the cable bush,
and the supplied rechargeable battery pack
and controller hook attached
Camera: 37 × 42.5 × 86.5 mm
(1 1/2 × 1 11/16 × 3 1/2 in.) (w/h/d) including
the projecting parts
Cable length: 2.8 m (9.18 feet)
Mass (approx.): 500 g (1 lb 1 oz) main unit only
580 g (1 lb 4 oz) including the supplied
rechargeable battery pack, controller hook,
and “Memory Stick PRO Duo” media
AC Adaptor
Power requirements: AC 100 V - 240 V,
50 Hz/60 Hz
Current consumption: 0.35 A - 0.18 A
Power consumption: 18 W
Output voltage: DC 8.4 V*
Operating temperature: 0 °C to 40 °C (32 °F to
104 °F)
Storage temperature: -20 °C to + 60 °C (-4 °F to
+ 140 °F)
Dimensions (approx.): 48 × 29 × 81 mm
(1 15/16 × 1 3/16 × 3 1/4 in.) (w/h/d)
excluding the projecting parts
Mass (approx.): 170 g (6.0 oz) excluding the
power cord (mains lead)
* See the label on the AC Adaptor for other
specifications.
Rechargeable battery pack NP-FH60
Maximum output voltage: DC 8.4 V
Output voltage: DC 7.2 V
Maximum charge voltage: DC 8.4 V
Maximum charge current: 2.12 A
Capacity: 7.2 Wh (1 000 mAh)
Type: Li-ion
Design and specifications are subject to change
without notice.
• Manufactured under license from Dolby
Laboratories.
To Next Page
Loading...
