21
Advanced Operations
Playing Back a Message at a Desired
Time with an Alarm
You can sound an alarm and start playback of a selected message at a
desired time.
1 Use FILE and –./>+ to select the
file and the message you want to play
back.
2 Enter the alarm setting mode.
1 Press MENU.
The unit enters the menu mode and
“ALARM OFF” will be displayed.
(If “ALARM On” is displayed, the alarm has
been set. If you do not wish to change the
setting, press MENU and exit the menu
mode.)
Note
“ALARM OFF (or On)” will not appear and the alarm cannot be set if
the clock has not been set or no message has been recorded in the
selected file.
2 Press NxPLAY/STOP.
“OFF” starts to flash.
MENU
FILE
Display window
NxPLAY/STOP
–./>+
Continued
To Next Page
