Overview
Saving SNC easy IP setup software to your PC / Assigning the IP Address to the Camera
3
Overview
This instruction manual is for SNC easy IP setup, the
software for assigning an IP address to Sony network
cameras.
Saving SNC easy IP
setup software to your
PC
1
Insert the CD-ROM in your CD-ROM drive.
Open the index.html file on the CD-ROM. A cover
page will appear automatically in your Web
browser.
2
Click Application and check the EULA.
3
Click Agree and install.
Tip
If you are using Windows XP Service Pack 2 or
later, Windows Vista or Windows 7, a message
regarding the active contents may appear.
4
Follow the Windows instructions to save SNC easy
IP setup to the specified folder.
The software is saved.
Assigning the IP
Address to the Camera
To connect the camera to a network, you need to assign
a new IP address to the camera when you install it for the
first time.
Before starting, connect the camera, referring to
“Connection” in the supplied Installation Manual.
Consult the administrator of your network for the IP
address to be used.
Notes
• SNC easy IP setup may not operate correctly if you
use a personal firewall or antivirus software in your
computer. In this case, disable the software.
• If you are using Windows XP Service Pack 2 or later,
Windows Vista or Windows 7, disable the Windows
Firewall function. Otherwise SNC easy IP setup will
not operate correctly. For the setting, see “Configuring
Windows Firewall” in “When using Windows Vista”
on page 8 or “Configuring Windows Firewall” in
“When using Windows 7” on page 6.
To Next Page
Loading...
