Configuring Windows Firewall
28
7
If the Add Program dialog appears, select SNC
toolbox or SNC audio upload tool and click OK.
SNC toolbox or SNC audio upload tool is added to
the Program or port list.
8
Click OK.
When the settings above are completed, cameras on
the network will be displayed on the SNC toolbox
or SNC audio upload tool.
When using Windows 7
Configuring Windows Firewall
SNC toolbox or SNC audio upload tool may not operate
correctly depending on the configuration of Windows
Firewall. (No cameras are shown in the list even if they
are detected.) In this case, confirm the Windows
Firewall configuration as follows:
To turn Windows Firewall off
1
Select Control Panel from the Start menu of
Windows.
2
Click Windows Firewall.
3
Select Turn Windows Firewall on or off.
4
Select Turn off Windows Firewall.
The cameras will be displayed in the list.
To Next Page
Loading...
