During call
Tap the headset or the area near your ear 3 times quickly (with an interval of about 0.2 seconds between taps) to
finish a call.
Supported profile: HSP (Headset Profile)
You can use either the left or right headset unit to perform the following operations.
When only one headset unit is worn in your ear, operate the headset unit that is worn.
Outgoing call
Tap the headset or the area near your ear 3 times quickly (with an interval of about 0.2 seconds between taps) to
cancel an outgoing call.
Incoming call
Tap the headset or the area near your ear 3 times quickly (with an interval of about 0.2 seconds between taps) to
answer a call.
During call
Tap the headset or the area near your ear 3 times quickly (with an interval of about 0.2 seconds between taps) to
finish a call.
Note
When [Head Gesture] is enabled on the “Sony | Sound Connect” app and you are using only one headset unit, the headset may
not work properly.
When [Head Gesture] is enabled on the “Sony | Sound Connect” app, the functions may not work properly with the head gesture
controls depending on the connected device or the application you are using.
Related Topic
Using only one headset unit
Receiving a call
Making a call
5-056-451-11(2) Copyright 2024 Sony Corporation
To Next Page
Loading...
