Note
Do not use an air duster, etc. to remove dust, etc.
Dust and other debris may enter the sound output holes and cause malfunction.
Cleaning the driver unit part
If foreign material such as earwax becomes attached to the sound output hole, the sound may become muffled or
difficult to hear.
In this case, you can wipe off the dirt with pure water type wet wipes.
Remove the dirt so that it does not push into the sound output hole.
Do not use wet wipes containing alcohol, thinner, benzene, etc. as they may cause malfunction or damage.
Cleaning the holes of the charging case
Clean the holes (E) where the housing parts fit with a cotton swab, etc.
Drying the headset
After cleaning is complete, leave the headset to dry thoroughly at room temperature.
To Next Page
Loading...
