5-056-451-11(2) Copyright 2024 Sony Corporation
Note
When drying the headset, if the IR sensors touch the table, the headset will be considered worn and the rechargeable
battery may continue to be consumed. Place the headset units with the IR sensors facing sideways or upwards.
Set the headset in the charging case.
After maintenance as well as after cleaning and drying the headset, be sure to set the headset units in the charging
case.
Be sure to close the charging case lid.
Make sure the fitting supporter is properly seated inside the charging case before closing the charging case lid.
2
To Next Page
Loading...
