Hint
The operation above is an example. For more details, refer to the operating instructions supplied with the computer.
Note
If the music playback sound quality is poor, check that the A2DP function which supports music playback connections is enabled
in the computer settings. For more details, refer to the operating instructions supplied with the computer.
If the last connected Bluetooth device is placed near the headset, the headset may automatically connect to the device when you
turn on the headset and may not connect to another device.
If this occurs, cancel the Bluetooth connection on the last connected device.
If you cannot connect your computer to the headset, delete the headset pairing information on your computer and perform pairing
again. As for the operations on your computer, refer to the operating instructions supplied with the computer.
Related Topic
Wearing the headset
Using only one headset unit
How to make a wireless connection to Bluetooth devices
Click [LinkBuds Open] on the [Bluetooth] screen while pressing the computer Control button and select
[Connect] from the pop-up menu.
You will hear a notification sound indicating that the connection is established from both headset units at the same
time. When you are wearing only one headset unit, you will hear the notification sound from the headset unit you
are wearing.
5
To Next Page
Loading...
