Help Guide
Wireless Stereo Headset
LinkBuds Open
Listening to music from a device via a Bluetooth connection
If your Bluetooth device supports the following profiles, you can enjoy listening to music and control the device from your
headset via a Bluetooth connection.
A2DP (Advanced Audio Distribution Profile)
You can enjoy high-quality music wirelessly.
AVRCP (Audio Video Remote Control Profile)
You can adjust the volume, etc.
The operation may vary depending on the Bluetooth device. Refer to the operating instructions supplied with the
Bluetooth device.
Put the headset units into your ears.
See “Wearing the headset” for how to wear the headset in your ears.
1
Connect the headset to a Bluetooth device.
2
Operate the Bluetooth device to start playback and adjust the volume to a moderate level.
3
Tap the left or right unit of the headset or the area near your ear to adjust the volume.
Increase the volume: Tap the right unit of the headset or the area near your ear 5 or more times quickly (with an
interval of about 0.4 seconds or less between taps) during music playback.
As you repeatedly tap the headset or the area near your ear, a notification sound is emitted and the volume
increases by 1 step every 0.4 seconds, regardless of the number of times you tap.
Lower the volume: Tap the left unit of the headset or the area near your ear 5 or more times quickly (with an
interval of about 0.4 seconds or less between taps) during music playback.
4
To Next Page
Loading...
