Help Guide
Wireless Stereo Headset
LinkBuds Open
Controlling the audio device (Bluetooth connection)
If your Bluetooth device supports the device operating function (compatible profile: AVRCP), the following operations are
available. The available functions may vary depending on the Bluetooth device, so refer to the operating instructions
supplied with the device.
You can use the right headset unit to perform the following operations.
Increase the volume: Tap the headset or the area near your ear 5 or more times quickly (with an interval of about 0.4
seconds or less between taps) during music playback.
As you repeatedly tap the headset or the area near your ear, a notification sound is emitted and the volume increases
by 1 step every 0.4 seconds, regardless of the number of times you tap.
When the volume reaches the maximum, an alarm sounds.
You can use the left headset unit to perform the following operations.
Lower the volume: Tap the headset or the area near your ear 5 or more times quickly (with an interval of about 0.4
seconds or less between taps) during music playback.
As you repeatedly tap the headset or the area near your ear, a notification sound is emitted and the volume lowers by
1 step every 0.4 seconds, regardless of the number of times you tap.
When the volume reaches the minimum, an alarm sounds.
You can use either the left or right headset unit to perform the following operations.
Play/Pause: Tap the headset or the area near your ear twice quickly (with an interval of about 0.2 seconds between
taps).
To Next Page
Loading...
