MHC-EC99/EC79/EC69/EC99T/EC79T/EC69T.GB.4-131-117-11(1)
14
GB
Setting the clock
Use buttons on the remote to set the
clock.
1
Turn on the system.
Press /.
2
Select the clock set mode.
Press CLOCK/TIMER SET.
If “PLAY SET” ashes, press
/ repeatedly to select
“CLOCK,” and then press ENTER.
3
Set the time.
Press / repeatedly to set the
hour, and then press ENTER.
4
Use the same procedure to set
the minutes.
Note
e clock settings are lost when you disconnect
the power cord or if a power failure occurs.
To display the clock when the system
is o
Press DISPLAY repeatedly until the clock
is displayed. e clock is displayed for
about 8 seconds.
To Next Page
Loading...
