Sony MHC-EC69 - Using Optional Audio Components

MHC-EC99/EC79/EC69/EC99T/EC79T/EC69T.GB.4-131-117-11(1)
23
GB
Operations
Notes
 Some time may be needed to start playback
when:
 the folder structure is complex.
 the memory capacity is excessive.
 e system can play back to a depth of 8
folders only.
 is system does not necessarily support all
the functions provided in a connected USB
device.
 e playback order for the system may dier
from the order of the connected USB device.
 Folders that have no audio les are skipped.
 e le formats that this system can play are
as follows:
 MP3: le extension “.mp3”
 WMA: le extension “.wma”
 AAC: le extension “.m4a”, “.mp4”, “.3gp”
Note that even when le names have the
above le extensions, if the actual les dier,
playing these les may generate a loud noise
which could damage the speaker system and
the system may malfunction.
Note on Repeat Play
All les on a USB device are repeated until you
stop playback.
Using optional audio
components
1 Prepare the sound source.
Connect additional audio component
to the PC IN jack on the unit using an
audio analog cord (not supplied).
2 Turn down the volume.
Press VOLUME (or turn the
VOLUME control on the unit).
3 Select the PC function.
Press FUNCTION repeatedly.
4 Start playback.
Start playback of the connected
component.
5 Adjust the volume.
Press VOLUME +/(or turn the
VOLUME control on the unit).