20
GB
x When playing a DVD
•OFF: does not play repeatedly.
•ALL
1)
: repeats all the titles.
• TITLE: repeats the current title on a disc.
• CHAPTER: repeats the current chapter.
x When playing a VIDEO CD/CD/MP3
when Program Play is set to OFF
•OFF: does not play repeatedly.
•ALL
1)
: repeats all the tracks on a disc, or
all the tracks in the current album
2)
.
• TRACK: repeats the current track.
x When playing a JPEG
•OFF: does not play repeatedly.
• ALL: repeats all the files on the disc, or
repeats the current album
2)
.
x When Program Play is set to ON
•OFF: does not play repeatedly.
• ALL: repeats Program Play.
4 Press ENTER.
Repeat Play starts.
1)
When “SHUFFLE (ALL)” is selected, you can select
the Repeat Play of “TITLE”, “CHAPTER” or
“TRACK” only, and “ALL” will not appear.
2)
When “CONTINUE (ALBUM)” is selected for MP3
or JPEG or “SHUFFLE (ALBUM)” is selected for
MP3.
To cancel Repeat Play
Select “OFF” in step 3.
To turn off the Control Menu
Press DVD DISPLAY repeatedly until the
Control Menu disappears.
Notes
• Depending on the DVD, you cannot perform Repeat
Play.
• You cannot perform Repeat Play during PBC
playback of VIDEO CDs (page 19).
• If you select “ALL”, the program repeats up to five
times.
Tips
• You can set Repeat Play when the playback is
stopped. Press REPEAT repeatedly to select the
setting, then press nN to start Repeat Play.
• You can quickly display the “REPEAT” status. Press
REPEAT.
You can make a program of up to 25 steps.
You can synchro record the programmed tracks
onto a cassette tape (page 42).
Using the front panel display
1 Press FUNCTION + or – repeatedly (or
DVD on the unit) to switch the function
to DVD.
2 Press PLAY MODE repeatedly in stop
mode until “PGM” appears.
3 Press DISC SKIP (or DISC 1 – 3 or DISC
SKIP/EX-CHANGE on the unit) to select
a disc.
To program all the tracks on a disc at once,
proceed to step 5 with “AL” displayed.
4 Press . or > repeatedly (or turn
l L on the unit) until the desired
track number appears.
When programming an MP3, press
ALBUM + or – to select album, then press
. or > repeatedly (or turn l L
on the unit) until the desired track number
appears.
Creating your own
program
— Program Play
Selected track number
Disc tray number
To Next Page
Loading...
Need help?
General
