40
GB
Use buttons on the unit for the operation.
1 Press TAPE A/B repeatedly to select
deck A or B.
2 Press Z PUSH.
3 Load a recorded/recordable tape in
deck A or B with the side you want to
play/record facing forward.
You can use TYPE I (normal) tape.
1 Load a tape.
2 Press PLAY MODE repeatedly to select
“g” to play one side. Select “j”
1)
to
play both sides.
To play both decks in succession, press
PLAY MODE repeatedly until “RELAY”
(Relay Play)
2)
appears in the display.
3 Press nN.
Press the button again to play the reverse
side. The tape starts playing.
1)
The tape deck stops automatically after repeating the
sequence five times.
2)
Relay Play always follows this cyclic sequence up to
five times, then stops:
Deck A (front side) t Deck A (reverse side) t
Deck B (front side) t Deck B (reverse side)
Other operations
Tip
If you select either deck A or B and press nN, X,
m or M when no tape is in that deck, the system
automatically switches to the tape in the other deck and
starts that operation.
Tape – Play
Loading a tape
With the side
you want to
play/record
facing
forward.
Playing a tape
To Do this
Stop play Press x.
Pause Press X.
Press X again to resume play.
Fast-forward or
rewind
Press m or M.
Remove a tape Press Z PUSH on the unit.
Reverse indicator
Tape presence indicator
Forward indicator
To Next Page
Loading...
Need help?
General
