MHC-V3/V4D
30
Ver. 1.1
• Parameter of error code
This is the detail of error code.
• Time of error code
This is the laser time when an error occurred.
To clear the Laser Hours
Press the [
DISPLAY] button and then press the [CLEAR]
button. The data for both CD and DVD data are reset.
To clear the Emergency History
Press the [DVD TOP MENU] button and then press the [CLEAR]
button.
The error code for all emergency history would be reset.
To clear the Initialize Setup Data
Press the [DVD/TUNER MENU] button and then press the
[CLEAR] button on the remote commander.
Example of Error code
1. 01 05 04 04 00 92 46 00
00 00 00 00 00 00 23 45
Example of Error code
1. 01 05 04 04 00 92 46 00
00 00 00 00 00 00 23 45
Emg. History Check
1. 01 05 04 04
Laser Hours CD 0h 0min
DVD 0h 0min
00 92 46 00
00 00 00 00 00 00 23 45
2. 02 02 01 01 00 A9 4B 00
00 00 00 00 00 00 23 45
Next Next Page Prev Prev Page
O Return to Top Menu
Emg. History Check
1. 00 00 00 00
Laser Hours CD 999h 59min
DVD 999h 59min
00 00 00 00
00 00 00 00
00 00 00 00
2. 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
Next Next Page Prev Prev Page
O Return to Top Menu
To return to the Top Menu of Remocon Diagnosis Menu
Press the [0] button on the remote commander.
• Check Version Information
To check the version information, please follow the following
procedure.
1. From the Top Menu of Remocon Diagnosis Menu, select “4.
Version information” by pressing the [4] button on the remote
commander. The following screen appears on the on-screen
display.
To return to the Top Menu of Remocon Diagnosis Menu, press
the [0] button on the remote commander.
Version information
O Return to Top Menu
Firm (Main) : Ver. xxxxx
Firm (Sub) : xxxxx
RISC : xxxxx
8032 : xxxxx
Audio DSP : xxxxx
Servo DSP : xxxxx
Emg. History Check
Initialize setup data...
Laser Hours
CD 999h 59min
DVD 999h 59min
Next Next Page Prev Prev Page
O Return to Top Menu
To Next Page
Loading...
