Appendix
Appendix A-3
Digital Betacam playback (MSW-M2000/M2000P/M2000E/M2000EP)
Video
Digital Audio (CH1 to CH4)
Analog Audio (cue track)
Betacam SX playback
Video
Audio
Analog Betacam playback (MSW-A2000/M2000/M2000E)
Video
Bandwidth
Y MSW-M2000/M2000E: 0 to 5.75 MHz +0.5 dB/–0.5 dB
MSW-M2000P/M2000EP: 0 to 2.75 MHz +0.5 dB/–0.5 dB
R–Y/B–Y
0 to 2.75 MHz +0.5 dB/–0.5dB
S/N ratio 62 dB or more
K factor 1 % or less
Frequency response (0 dB at 1 kHz)
20 Hz to 20 kHz +0.5 dB/–1.0 dB
Dynamic range 95 dB (at 1 kHz, emphasis on)
Distortion (T.H.D at 1 kHz reference level) 0.05 % rms (emphasis on)
Wow and flutter Below measurable level
Frequency response (0 dB at 1 kHz)
100 Hz to 12 kHz + 3 dB/–3 dB
S/N ratio (at 3 % distortion level) 45 dB (at 1 kHz)
Distortion (T.H.D at 1 kHz reference level)
2 % or less
Wow and flutter MSW-M2000/M2000E: Less than 0.2 % rms
MSW-M2000P/M2000EP: Less than 0.2 % (DIN 45507 weighted)
Bandwidth
Y
R–Y/B–Y
S/N ratio
K factor (2T pulse)
525-line mode: 0 to 4.5 MHz +0.5 dB/–3.0 dB
625-line mode: 0 to 5.5 MHz +0.5 dB/–3.0 dB
0 to 2.0 MHz +0.5 dB/–3.0 dB
56 dB or more
1 % or less
Frequency response
Dynamic range
Distortion
20 Hz to 20 kHz +0.5 dB/–1.0 dB (0 dB at 1 kHz)
90 dB or more (at 1kHz, emphasis on)
0.05 % or less (at 1 kHz, emphasis on, reference level (+4 dBm))
Metal tape Oxide tape
Bandwidth Y 30 Hz to 4.5 MHz +0.5 dB/ –4.0 dB 30 Hz to 4.1 MHz +0.5 dB/ –6.0 dB
R–Y/ B–Y 30 Hz to 1.5 MHz +0.5 dB/–3.0dB 30 Hz to 1.5 MHz +0.5 dB/–3.0 dB
S/N ratio Y
R–Y/ B–Y 48 dB or more 45 dB or more
3% or lessK factor (2T pulse)
3% or less
R–Y/ B–Y 4% or less
Y/C delay
51 dB or more
48 dB or more
LF non-linearity
20 ns or less
2% or less
Y
To Next Page
Loading...
